Pro Shine – Drying, High Gloss Floor Finish
Pro Shine is a professional-grade, all-purpose floor finish engineered by Twin-Pro Industrial Products to deliver a brilliant, long-lasting shine with minimal effort.
Designed for both no-buff and spray-buff systems, this multi-coatable formula is the ideal solution for maintaining floors in high-traffic areas or environments where heavy machinery isn’t practical.
DESCRIPTION:
Key Features & Benefits
- High-Gloss Brilliance: Achieve a professional, “wet-look” finish without the immediate need for buffing.
- Rapid Drying Time: Dries in approximately 20 minutes, allowing for quick turnaround and secondary coats.
- Superior Durability: Formulated with special polymers and resins to create a hard, scuff-resistant film that resists heel marks and soiling.
- Easy Maintenance: The finish is easily maintained through standard dust and damp mopping.
- Versatile Application: Can be used on new or newly stripped floors (with a sealer) and can be buffed with high-speed machines to further enhance gloss if desired.
- Cost-Effective Coverage: High efficiency with 1 liter covering between 30-35m2 .
Simple Application Guide
- Preparation: Ensure floors are clean. For new or newly stripped porous floors, apply a sealer first.
- Apply: Using clean equipment, apply a thin, even coat. Do not rub the product in.
- Dry: Wait 20 minutes.
- Recoot: Apply a second thin coat for maximum protection and gloss.
- Restore: For worn areas, “feathering” an additional coat can restore the shine without needing to recoat the entire floor.
Pro Tip: Periodic stripping is recommended to eventually renew the floor surface and ensure a fresh start for your next application.
DIRECTIONS:
- Use only clean equipment (applicator, mops and pails) in applying the finish.
- Apply a thin even coat. Do not rub.
- Another tin coat is recommended for added gloss and protection. One liter covers 300- 35 M2.
- Allow 20 minutes for drying time before applying a second coat.
- The use of a sealer is required for new floors and newly stripped floors before appling finish. This is especially import for porous floors.
